上银SLA轴承

上银SLA轴承支承轴承的轴线高度与固定轴承SFA和螺母壳GFD匹配。枕头块可以从上面(S1)和下面(S2)拧上。参考边使对齐单元更容易。适用于支承轴承的端部加工为S1-xx/S5-xx型。

上银SLA轴承支承轴承的轴线高度与固定轴承SFA和螺母壳GFD匹配。枕头块可以从上面(S1)和下面(S2)拧上。参考边使对齐单元更容易。适用于支承轴承的端部加工为S1-xx/S5-xx型。

  1. Supported bearing SLA

    The axis height of the supported bearing is matched to fixed bearing SFAand nut housing GFD. The pillow block can be screwed on from above (S1) and below (S2).
    The reference edge makes it easier to align the unit. The end machining suited to the supported bearing is the S1-xx/S5-xx type.


  2. Table Bearing unit dimensions
    Article numberShaft nominal ØLL/2
    js9
    L1L2L3HH1
    js9
    H2H3H4H5bCAD
    SLA0612623134385041221351196CAD
    SLA10168686525268583222715159CAD
    SLA122094475260776434227171510CAD
    SLA17251085465668872392710191812CAD
    SLA20321125665739278422710201814CAD
    SLA304012663828410592503213232116CAD
    SLA40501467382104125112603213302118CAD

    Unit: mm

  3. Table Bearing unit dimensions
    Article numberShaft nominal ØBB1S1
    H12
    S2dD
    H6
    Circlip
    DIN 471
    Deep-groove ball
    bearing DIN 625
    CAD
    SLA0612154,55,3M66196 × 0,7626.2RSCAD
    SLA1016247,58,4M10103010 × 16200.2RSCAD
    SLA12202688,4M10123212 × 16201.2RSCAD
    SLA172528810,5M12174017 × 16203.2RSCAD
    SLA2032341010,5M12204720 × 1,26204.2RSCAD
    SLA3040381112,6M14306230 × 1,56206.2RSCAD
    SLA4050441312,6M14408040 × 1,756208.2RSCAD


备注说明;遇到产品有型号以及尺寸图的,如果图片太模糊,可以点击图片,图片会自动跳出放大,就比较清晰。